This window seat just needs a couple of coats of paint and it's ready for cushions, books and cheeks

DEAR TIM:

I have to have a window seat.

I've searched everywhere and can't find any kits, so I'm beginning to believe I'll end up with a custom window seat for my family room.

How hard is it to build a storage window seat? What special tools and materials do I need? How do I compute the size when I know I want cushions to sit on?

 

What else do I need to know to end up with a spectacular window seat?

--Beth P., Westerly, R.I.

DEAR BETH:

If you have moderate building skills and a few common tools, you'll have a completed window seat bench in just a couple of days.

I can say this with confidence, as I just completed the largest window seat of my career this past weekend. It's over 15 feet long, and it's going to get all kinds of compliments once it's painted and stocked with books, cushions and other decorative items. The inspiration came from my daughter Meghan, who envisioned the built-in window seat that would allow her to cozy up and read a book while gazing out at the lake.

The easiest window seat to build is just one that looks like a box.

It would have a vertical wall or face and then a flat top. But a window seat with storage is really the thing to have, as you'll get not only the function of the seat but the space beneath it as well. You can have hidden or open storage, but hidden storage -- which uses doors or a flip-top seat -- adds significantly to the cost and complexity of the project.

Fortunately, I had my helper take hundreds of that show my window seat project from start to finish. I intend to use the photos to produce instructions and plans.

If you need inspiration as to what kind of window seat you want, all you have to do is look at open bookcases or small kitchen cabinets that typically can be found over a refrigerator. The wood window seat I just built resembles an open bookshelf. Keep in mind that the total height of a window seat can't be much more than 18 or 19 inches. You don't have too much open space, considering that you need to fit in the top, the face frame, the bottom shelf and space for some baseboard.

If you want the look of cabinetry with doors that conceal the things under your seat, all you have to do is locate tiny cabinet doors similar to the ones you find over a refrigerator. Then build a frame that will fit the doors. This can be problematic from a scale perspective, as you should make sure the doors are in proportion to the overall height and width of the seat. This is best left to a real finish carpenter. If I were you, I'd start with just an open-shelf window seat for your first project.

I used sheets of 3/4-inch thick birch plywood, paint-grade 1-by-2 solid poplar and a few pieces of common molding to construct my window seat. Go to a real lumberyard for these materials, not a home center. I doubt you'll ever find 7-ply birch plywood at a big-box store!

Believe it or not, I constructed the entire window seat with a circular saw, drill, framing square, measuring tape, hammer, a few squeeze clamps, a screwdriver and my trusty pocket-hole jig. The pocket-hole jig is an amazing tool that allows you to drill perfect concealed low-angle holes in finish lumber so that you can assemble them without glue. The entire face frame of my window seat looks like a finish piece of custom furniture that I assembled in less than 30 minutes with screws and a screwdriver! Pocket-hole jigs are affordable and should be on every person's workbench.

To ensure you end up with a comfortable window seat, you need to look at and sit in many of the pieces of furniture in your home. Find the most comfortable chair in your home and measure it. Note its height and the depth of the seat. You'll quickly discover that for maximum comfort your legs shouldn't dangle off the edge of the seat without touching the floor. What's more, if a seat is too low, your knees will uncomfortably point to the ceiling. Build a seat that's too deep and you won't be able to relax using a wall as a backrest. Lot's of thought went into creating the perfect chair in your home. Copy its dimensions.

Birch plywood makes for a perfect material for any number of reasons.

First, the birch veneer makes for a magnificent surface for painting. Its fine grain makes for a silky smooth finish. You can stain birch plywood, but be sure the face-frame lumber has similar grain and coloration so the stain or clear finish matches.

For a very custom look and feel, be sure all the trim that surrounds your window seat matches the trim and moldings in the room. If you have an older home, you can take a piece of your existing baseboard to a woodworking shop or mill. They have equipment that allows them to match the profile exactly.

Before you make the final decision on a flip-top window seat, understand that it makes storage of items a bit of a hassle.

Things get stored on top of one another much like a chest freezer. If you've ever owned a chest freezer (as opposed to one that opens like a regular refrigerator), you might agree that a chest freezer is not the best design.

By contrast, you'll love the look of an open shelf on your new window seat!